Return to site

F4 Software Serial Number

broken image


  • GUI (Web Based Manager) information, FortiOS 3.0 , 4.0, 4.1

Update: The software that comes with the F4, Watview, can't communicate with the null-modem in place. It has no communication problems with the straight through serial cable.

The fn+F4 function key combination or the NVIDIA control panel should now toggle between displays. Closing all applications before toggling between displays should avoid this issue. If no Direct 3D software is running, the toggle displays function should operate as expected. Aug 18, 2020 The serial number of your Magic Mouse 2 is on the bottom surface of the device, along with other markings. It's a string of 17 letters and numbers. Earlier wireless mice. You can find the serial number of earlier Apple wireless mouse models inside the device's battery bay.

In the following example:
  • Serial Number = FGT-602803031004
  • Version = 3.00
  • Build = 0752


  • GUI (Web Based Manager)informationFortiOS 4.2 and above
In the following example:
  • Serial Number = FG500A2904550179
  • Version = 4.0
  • Build = 0261

F4 Software Serial Number Cracks

  • CLI commands
In the following example:
  • Serial Number = FGT-602803031004
  • Version = 3.00
  • Build = 0752

FGT # get system status
FGT_ISP # get system status
Version: Fortigate-60 3.00,build0752,091223
Virus-DB: 8.00631(2008-01-15 14:27)
IPS-DB: 2.00461(2008-01-18 11:23)
Serial-Number: FGT-602803031004
[..]

Note about non-standard build numbers
It may happen that the build number is not standard, as per the example below :
Version: Fortigate-80C 3.00,build5380,090226
[..]
Branch point: 737
MR/Patch Information: MR7
[..]

The Branch point output line is your actual build number. You should refer to it when you are planning a firmware upgrade or need to provide this information to technical support.
  • FortiGate Chassis serial number
Login to the Shelf Manager and then use the command:

  • GUI (Web Based Manager)information
In the following example:
  • Serial Number = FE-1003107006754
  • Version = 4.0
  • Build = 0103


  • CLI commands
In the following example:
  • Serial Number = FE-1003107006754
  • Version = 4.0
  • Build = 0103

FMAIL # get system status
Version: FortiMail-100 v4.0,build0103,091223 (GA Patch 1)
Virus-DB: 11.544(03/03/2010 01:14)
Serial-Number: FE-1003107006754
[..]

  • Step 1 : Open the FortiClient console, double-click on the FortiClient icon or right-click and choose 'Open FortiClient Console'

  • Step 2 : look for the Version and Serial number
In the following example:
  • Serial Number = FCT8000027918078
  • Version = 4.1.2.138
  • Build =N/A


  • Step 3 : Look for the UID
In the following example:
  • UID = 0027918078


  • GUI (Web Based Manager)information

In the following example:

  • Serial Number = FL-2KB3R09600027
  • Version = 4.0
  • Build = 0133



  • CLI command
In the following example:
  • Serial Number = FL-2KB3R09600027
  • Version = 4.0
  • Build = 0133

FAZ # get system status


Firmware Version: FortiAnalyzer-2000B v4.0,build0133,100225 (MR1 Patch 4)
Branch point: 133
Release Version Information: MR1 Patch 4
Serial Number: FL-2KB3R09600027
[..]





  • GUI (Web Based Manager)information
In the following example:
  • Serial Number = FV-1KB3R09600002
  • Version = 3.30
  • Build = 0116

F4 Software Serial Number
  • CLI command
In the following example:
  • Serial Number = FV-1KB3R09600002
  • Version = 3.30
  • Build = 0116

FortiWeb # get system status
International Version:FortiWeb-1000B 3.30,build0116,090914
Serial-Number:FV-1KB3R09600002
Bios version:00010010
Log hard disk:Available
Hostname:FortiWeb
Current HA status: mode=Standalone

  • GUI (Web Based Manager) information 3.0
Step 1: Select 'System Settings' from the drop down menu of the main window


Step 2:

In the following example:
  • Serial Number = FMG1003107007006
  • Version = 3.00
  • Build = 0680


  • GUI (Web Based Manager) information 4.0 and above
In the following example:
  • Serial Number = FMG40A3907500015
  • Version = 4.0
  • Build = 0224


  • CLI command
In the following example:
  • Serial Number = FMG40A3907500015
  • Version = 4.0
  • Build = 0224

FMGR # get fmsystem status
[..]
Version : v4.0-build0224 200110 (MR1 Patch 3)
Serial Number : FMG40A3907500015

  • CLI command for FortiSwitch 500 and 1000
In the following example:
  • Serial Number = FS5SFP20F1087008
  • Version = 4.0
  • Build = 0353

(FS-500) > show system version
System Description............... FortiSwitch Ethernet Fabric Switch
Machine Model................. FortiSwitch-500
Chassis Serial Number............. FS5SFP20F1087008
Model Part Number............... 800-90003-20
HW Version................... 20-F
Software Order Code.............. FS-500-FSOS
Manufacturer.................. Fortinet
Burned In MAC Address............. 00:1A:F6:00:0D:EA
Software Release Version............ v4.0,build0353,100127

  • CLI command
In the following example:
  • Serial Number = FS-1KB3R09000032
  • Version = 3.0
  • Build = 0066

FortiScan# get system status
Software

Firmware Version: FortiScan-1000B v3.0,build0066,091028 (MR1)
Branch point: 066
Release Version Information: MR1
Serial Number: FS-1KB3R09000032

F4 Software Serial Number In Registry

  • GUI (Web Based Manager) information
In the following example:
  • Serial Number = FD-1KB3R08000022
  • Version = 4.0.1
  • Build = 0003

  • CLI command
In the following example:
  • Serial Number = FD-1KB3R08000022
  • Version = 4.0.1
  • Build = 0003

F4 Software Serial Numbers


Free Serial Number

FDB# get system status
Platform type : FD-1KB
Version : 4.0.1-0003
Serial Number : FD-1KB3R08000022
Current Time : Thu Mar 04 06:26:34 PST 2010
Daylight Time Saving : Yes
Time Zone : (GMT-8:00)Pacific Time(US&Canada)
Serial
  • CLI command
In the following example:
  • Serial Number = FV-1KB3R09600002
  • Version = 3.30
  • Build = 0116

FortiWeb # get system status
International Version:FortiWeb-1000B 3.30,build0116,090914
Serial-Number:FV-1KB3R09600002
Bios version:00010010
Log hard disk:Available
Hostname:FortiWeb
Current HA status: mode=Standalone

  • GUI (Web Based Manager) information 3.0
Step 1: Select 'System Settings' from the drop down menu of the main window


Step 2:

In the following example:
  • Serial Number = FMG1003107007006
  • Version = 3.00
  • Build = 0680


  • GUI (Web Based Manager) information 4.0 and above
In the following example:
  • Serial Number = FMG40A3907500015
  • Version = 4.0
  • Build = 0224


  • CLI command
In the following example:
  • Serial Number = FMG40A3907500015
  • Version = 4.0
  • Build = 0224

FMGR # get fmsystem status
[..]
Version : v4.0-build0224 200110 (MR1 Patch 3)
Serial Number : FMG40A3907500015

  • CLI command for FortiSwitch 500 and 1000
In the following example:
  • Serial Number = FS5SFP20F1087008
  • Version = 4.0
  • Build = 0353

(FS-500) > show system version
System Description............... FortiSwitch Ethernet Fabric Switch
Machine Model................. FortiSwitch-500
Chassis Serial Number............. FS5SFP20F1087008
Model Part Number............... 800-90003-20
HW Version................... 20-F
Software Order Code.............. FS-500-FSOS
Manufacturer.................. Fortinet
Burned In MAC Address............. 00:1A:F6:00:0D:EA
Software Release Version............ v4.0,build0353,100127

  • CLI command
In the following example:
  • Serial Number = FS-1KB3R09000032
  • Version = 3.0
  • Build = 0066

FortiScan# get system status
Firmware Version: FortiScan-1000B v3.0,build0066,091028 (MR1)
Branch point: 066
Release Version Information: MR1
Serial Number: FS-1KB3R09000032

F4 Software Serial Number In Registry

  • GUI (Web Based Manager) information
In the following example:
  • Serial Number = FD-1KB3R08000022
  • Version = 4.0.1
  • Build = 0003

  • CLI command
In the following example:
  • Serial Number = FD-1KB3R08000022
  • Version = 4.0.1
  • Build = 0003

F4 Software Serial Numbers


Free Serial Number

FDB# get system status
Platform type : FD-1KB
Version : 4.0.1-0003
Serial Number : FD-1KB3R08000022
Current Time : Thu Mar 04 06:26:34 PST 2010
Daylight Time Saving : Yes
Time Zone : (GMT-8:00)Pacific Time(US&Canada)

The custom macro shown below will allow you to mill numbers on your workpieces. Though it has some limitations that can be easily improved upon, the macro shows the logic behind how serializing can be done.

Read Next

The custom macro shown below will allow you to mill numbers on your workpieces. Though it has some limitations that can be easily improved upon, the macro shows the logic behind how serializing can be done.
A permanent common variable (#500) is used to keep track of the current serial number. Prior to starting a production run, the operator must reset this variable to zero. This custom macro allows you to serialize numbers from 1 to 999, which should cover most production runs. If you need to serialize higher, then you can figure out the logic for doing so from our example.

You'll call the serializing custom macro from your main program after you've commanded that the engraving tool be placed in the spindle. The variables you'll place in the call statement to the custom macro include: X and Y position to start (X, Y); the Z surface into which to engrave (Z); the spacing you desire between the characters (S); the feedrate for milling (F); and the depth to which you want to engrave (D). The custom macro does the rest, stepping the serial number each time the it is called, and milling the current number.

Ten subprograms are required, one for each number (0 through 9). The program for the number zero is O5000. Number one is O5001. Number two is O5002 and so on through O5009. We've included one example number (one, program O5001), but there isn't room here to show them all. If you want the rest of them, then visit www.cncci.com/resources/tips/serial.htm. However, it's likely that you'll need to create your own number programs, based upon the size and font you require (the numbers you can find on my Web site are 1.0-inch high).

Here is a sample calling program—just enough to show the custom macro being called:

O0001 (MAIN PROGRAM)
N005 T01 M06 (ENGRAVING TOOL)
N010 G54 G90 S440 M03
N015 G00 X0 Y0
N020 G43 H01 Z1.0 M08
N025 G65 P4999 X1.0 Y1. Z0.0 F4.0 S0.75 D0.01
N030 G91 G28 Z0 M19
N035 M30

Here is the serializing custom macro program:
O4999 (SERIAL NUMBERING CUSTOM MACRO)
#111=#24 (FIND CURRENT X ABS)
#112=#25 (FIND CURRENT Y ABS)
#113= #26 (FIND CURRENT Z ABS)
#500 = #500+1 (STEP SERIAL NUMBER)
#110 = #19 (SPACING)
#121 = #9 (FEEDRATE)
(1 THROUGH 1O)
IF [#500 GT 9] GOTO 10
G52 X#111 Y#112
#105 = 5000 + #500
G65 P#105 Z#26 D#7
G52 X0 Y0
GOTO 99

Good notes windows download. (10 THROUGH 99)
N10 IF [#500 GT 99] GOTO 20
G52 X#111 Y#112
#100 = FIX[#500/10] (GET FIRST)
#105 = 5000 + #100
M98 P#105
G52 X[#111+#110]
#101 = #500 - #100*10
G65 P[5000+ #101] Z#26 D#7
G52 X0 Y0
GOTO 99

(100 THROUGH 999)
N20 IF [#500 GT 999] GOTO 30
G52 X#111 Y#112
#100 = FIX[#500/100] (GET FIRST)
G65 P[5000 +#100] Z#26 D#7
G52 X[#111+#110] Y#112
#101 = #500 - #100*100
#102 = FIX [#101/10] (GET SECOND)
G65 P[5000+ #102] Z#26 D#7
G52 X[#111+#110*2] Y#112
#103 = #101 - #102*10 (GET THIRD)
#105 = 5000 +#103
G65 P#105 Z#26 D#7
G52 X0 Y0

GOTO 99
N30 #3000 = 100 (OUT OF RANGE)
N99
M99

Here is the subprogram for the number one (1):

O5001
G00Z[#26+0.1]
X0.5183Y0.0
Z[#26+0.1]
G01Z[#26-#7]F#121
X0.3961Y0.0
X0.3961Y0.7792
X0.3723Y0.7582
X0.345Y0.7371
X0.3143Y0.716
X0.2802Y0.695
X0.2453Y0.6752
X0.2122Y0.6581
X0.1809Y0.6436
X0.1515Y0.6318
X0.1515Y0.75
X0.2012Y0.7754
X0.2476Y0.8033
X0.2908Y0.8338
X0.3308Y0.8668
X0.3664Y0.9009
X0.3964Y0.9344
X0.4208Y0.9675
X0.4395Y1.0
X0.5183Y1.0
X0.5183Y0.0
M99





broken image